Gravimetric feeding: multiple feeder control

      
            Intelligent
          controls for
        optimum
       results

LOGIN

Multiple feeder control

MULTIPLE FEEDER CONTROL
USING FEEDER MOUNTED
CONTROL MODULES

 

  • Bus connected control modules
    ISC-CM plus (1 module per feeder)
  • Mounted in the weigh-feeders and
    fully wired ready for connection
  • Can be connected to either the
    Brabender touch screen operator
    interface Congrav® OP M plus 
    (max. 6 feeders), Congrav® OP
    15 (max. 16 feeders) or to a
    host/PLC system on site
    by just one single cable



Multiple feeder control

MULTIPLE FEEDER CONTROL
USING CONTROL MODULES FOR
CONTROL CABINET INSTALLATION

 

  • Bus connected microprocessor
    control modules Congrav® CB
    plus or Congrav® CBS
    (1 module per feeder)
  • DIN rail installation in a control
    cabinet or control box
  • Can be connected to either the
    Brabender touch screen operator
    interface Congrav® OP M plus 
    (max. 6 feeders), Congrav® OP
    15 (max. 16 feeders) or to a
    host/PLC system on site
    (Congrav® CB plus only)
    by just one single cable




Multiple feeder control

DATA SHEET DOWNLOAD

 

 

  Multiple feeder control: combinations
  Control module*
  (1 per feeder)
Download 
DIN-A4
Download
US Letter
+Operator
interface*
Download 
DIN-A4
Download
US Letter
  ISC-CM plusDownload nowDownload now+Congrav® 
OP M plus
Download nowDownload now
  ISC-CM plusDownload nowDownload now+Congrav®
OP 15
Download nowDownload now
  ISC-CM plusDownload nowDownload now+Customer`s 
host/PLC
  Congrav® CB plusDownload nowDownload now+Congrav® 
OP M plus
Download nowDownload now
  Congrav® CB plusDownload nowDownload now+Congrav® 
OP 15
Download nowDownload now
  Congrav® CB plusDownload nowDownload now+Customer`s 
host/PLC
  Congrav® CBSDownload nowDownload now+Congrav® 
OP M plus
Download nowDownload now
  Congrav® CBSDownload nowDownload now+Congrav® 
OP 15
Download nowDownload now
  * ISC-CM plus = feeder mounted control module; Congrav® CB plus and Congrav® CBS = control module
  for control cabinet installation; Congrav® OP M plus = touch screen operator interface for max. 6 feeders; 
  Congrav® OP 15 = touch screen operator interface for max. 16 feeders